Paper records the problem. A connected plant prevents it.
Disconnected systems, paper check sheets and data nobody can trace leave plants running blind and fixing quality after the fact. Here is what changes, line by line.
Parameter
Before · paper & spreadsheets
After · Silver ProtoQoL
BA-01Check sheet signed
Illegible initials, back-filled at shift end
E-signed by badge, 06:02:14 IST
BA-02Failed check item
A note in the margin, rarely actioned
Action raised with an owner, alert sent in seconds
BA-03Mould maintenance
Done when someone remembers
Due by time or shot count, whichever comes first
BA-04Operator at the machine
Anyone can press start
Unqualified operator refused at the machine
BA-05Wrong part at dispatch
Found by the customer
Dispatch lock: the wrong part can't leave the gate
BA-06Tracing a defect
Days in registers and spreadsheets
Part-level digital birth certificate, one scan away
BA-07Network drop
Readings lost for good
Store-and-forward: 0 readings lost
BA-08Shift report
Typed up the next morning
PDF shift report, sent automatically
BA-09Audit preparation
Weeks of chasing files
Full audit trail: who, what, when and why
Tbl. 01 — Shop-floor record, paper vs connectedTimestamps illustrative
SPQ-02Platform indexSheet 02 / 08
Eight pillars. Twenty modules. One source of truth.
Every pillar shares its records with the rest. A failed check raises an action, the action is tracked to closure, and every step lands in the same audit trail. Open a row to see what it covers.
No.Part no.PillarCoversFn.
MES.01Shift & daily production reports
MES.02Plan vs actual
MES.03OEE & downtime by reason
MES.04Hidden idle time
MES.05Machine start-up check sheets on tablets; a failed item raises an action
MES.06Production planning
MES.074M change management
MES.08Assembly poka-yoke
MES.09Operator performance
Used byProduction · Operators · Plant headInterfaceTablet, desktop, wall display
QMS.01Incoming inspection (AQL / c=0 sampling)
QMS.02In-process & pre-dispatch inspection
QMS.03SPC: I-MR, X-bar R, EWMA, CUSUM
QMS.04Red-bin rejection Pareto
QMS.05CAPA, 8D & 5-Why
QMS.06Customer & supplier complaints
QMS.07Supplier rating & PPM
QMS.08Control plan / PFMEA
Used byQuality · Production · StoresLinks toAudits, Stores, Alerts
AUD.01Internal, process, product & dock audits
AUD.02LPA & 5S audits
AUD.03Supplier and customer / OEM audits, incl. VSA
AUD.04Audit reports
AUD.05Document control with revisions
AUD.06E-signed approvals
AUD.07Full audit trail, designed to 21 CFR Part 11 / ALCOA+ principles
AUD.08IATF 16949-aligned
AUD.09APQP / PPAP
AUD.10Calibration & MSA
Used byQuality · Auditors · Plant headLinks toQMS, Documents, People
MNT.01Equipment & mould registry with shot counters
MNT.02Preventive maintenance by time or counter, whichever comes first
MNT.03Machine & mould history cards
MNT.04Breakdowns with MTTR / MTBF
MNT.05Critical spares
Used byMaintenance · ProductionFed byShot counters via PLC
WMS.01Store management
WMS.02Warehouse management
WMS.03QR bin tagging & FIFO
WMS.04Stock movements logged by operator and time
WMS.05Dispatch lock: the wrong part can't leave
WMS.06Part-level digital birth certificate
WMS.07Rework tracking
WMS.08Labels & gate passes
Used byStores · Dispatch · QualityPrintsIn your own label formats
IOT.01PLC / HMI integration
IOT.02Sensor retrofits
IOT.03Store-and-forward telemetry: no data lost when the network drops
IOT.04Interlocks
IOT.052D digital twin
IOT.06Oven, welding, pressure, current & cycle-time monitoring
IOT.07Process automation & workflows
IOT.08ERP / SAP connectors
Used byMaintenance · Production · ITBuilt byThe same team as the software
ALR.01Email alerts
ALR.02Phone / SMS alerts
ALR.03WhatsApp alerts
ALR.04Escalation matrix
ALR.05Automated PDF shift reports
ALR.06"My work" inbox of open actions, checks and approvals
Used byEveryone on the escalation matrixTriggered byAny pillar
PPL.01Operator qualification check: an unqualified operator is refused at the machine
Gate entry, passes and host approval in one flow. Safety induction is confirmed before anyone reaches the shop floor, and the visitor log is always ready for an audit.
Visitor pass · V-0428On site
Host
Quality head
Zone
Hall 2 · Moulding
In
09:42 · Gate 01
PPE
Shoes · glasses
Gate entryHost approvedInduction donePass printed
02Stores & warehouseQR bins · FIFO
Every bin tagged. Every move logged.
QR bin tagging with FIFO, stock movements recorded by operator and time, and a digital birth certificate that follows each part from incoming inspection to the truck.
Scan · bin A-14FIFO OK
Material
PP granules
Lot
2611-07 · oldest
Incoming
AQL passed
Moved
Op. 118 → Line 3
Time
10:14:32
03Machines & IoTMES · PLC
Machines that report for themselves.
PLC and sensor retrofits stream cycle time, temperature, pressure and current. OEE and downtime by reason update live, and an unqualified operator is refused at the machine.
IMM-07 · Line 3 — Moulding · Shift ARunning
84.2%OEE
Availability91.0
Performance95.4
Quality97.0
Cycle28.0 s
Zone 3228 °C
Inj. press.1,140 bar
RefusedOp. 131 not qualified for IMM-07
04Quality gateQMS · SPC
The line stops before the defect ships.
Live SPC (I-MR, X-bar R, EWMA, CUSUM) watches every critical dimension. When a point breaks the control limit, the interlock holds the line and a CAPA opens with the evidence attached.
X-bar · wall thickness 2.0 mmn = 5
Interlock firedLine 3 held · CAPA-0193 opened
05DispatchDispatch lock
Nothing wrong leaves the dock.
Every carton is scanned against the dispatch plan. A mismatched part number, a held lot or a missing inspection stops the load, and labels and gate passes print in your own formats.
Dock 02 · Truck HR-55 · Load 3/6Locked
PlanPart 7731-A · qty 480✓
PDIPre-dispatch inspection✓
ScanPart 7731-B · lot 2611-04✕
Wrong part. Blocked.Gate pass held · supervisor notified
06BoardroomReports · alerts
The boardroom sees what the floor sees.
Multi-plant dashboards, audit status and automated PDF shift reports, with alerts by email, SMS and WhatsApp that escalate until someone acts.
Alerts · plant headMy work · 3 open
WhatsApp · Line 3 heldSPC out of control on wall thickness. CAPA-0193 opened.
SMS · Dock 02 lockedWrong part scanned on load 3. Gate pass held.
Email · Shift A report (PDF)OEE 84.2% · 2 alerts · 3 open actions.
SPQ-04Shop floor · Operator tabletSheet 04 / 08
06:00, Line 3. The start-up check that can't be skipped.
Operators work on a tablet in Hindi or English, offline if the Wi-Fi drops. The check sheet doesn't just record a problem; it stops the machine and tells the right people.
01Badge in
The operator scans a badge. The system checks the skill matrix: an unqualified operator is refused at the machine.
02Tick the sheet
Each item has its method and limit on screen. Every tick is attributable and timed to the second.
03One item fails
The safety-gate interlock fails. An action is raised with an owner, and machine start stays blocked.
04Alert sent, sheet signed
Maintenance gets WhatsApp and SMS within seconds; if it stays open, it escalates. The operator e-signs the sheet.
Action raised · ACT-041206:01:58Safety gate interlock not respondingOwner: Maintenance · Priority high · Start blocked until closed
06
Nozzle heater band OKVisual
OKNG
07
Emergency stop testedFunction test
OKNG
08
First-off part approvedQuality sign-off
OKNG
8 / 8 checked · 1 NG
Sign & submitE-signed · 06:02:14 IST
Alert sent · L106:01:59
WhatsApp → Maintenance supervisor Sent
SMS → Shift in-charge Sent
Email → Quality Sent
Escalates to the plant head if still open in 30 min.
Fig. 04 — Operator tablet · Step 04 / 04
SPQ-05Hardware · Signal pathSheet 05 / 08
We wire the machines. Then we build the software.
PLC and HMI integration, sensor retrofits and edge gateways come from the same team that writes the application. Telemetry is stored and forwarded, so a network drop costs you no data.
TitleSignal path · Line 3 · Moulding
Dwg no.SPQ-IOT-01
ScaleNTS
Rev04
Sheet05 / 08
Link GW-01 → ServerOK
Readings buffered0
Readings lost0
Last event—
IOT.01PLC / HMI integration, on existing machines or retrofits
IOT.02Sensor retrofits for oven, welding, pressure, current and cycle time
IOT.03Store-and-forward telemetry: zero data loss when the network drops
IOT.04Interlocks that stop a machine, not just report it
IOT.052D digital twin of the line, live
IOT.06Process automation, workflows and ERP / SAP connectors
SPQ-06Compliance · Audit trailSheet 06 / 08
Audit-ready on any given shift.
Every record is attributable, timed to the second and kept with its full history. Designed to 21 CFR Part 11 and ALCOA+ principles, and aligned to IATF 16949.
Silver ProtoQoL
Control plan · Controlled documentInjection moulding — Housing, 2-cavity
Doc no. / RevCP-IMM-07 / 04
LineLine 3 — Moulding
Machine / MouldIMM-07 / M-14
LinkedPFMEA-07 · MSA-118
Rev 03→04Cycle-time upper limit revised after process validation. Linked PFMEA updated; previous revision retained, not overwritten.